End mills long, λ 45°, type NR, plain shank, code S111702, diameter 5 mm, coating AlCrN

Home
Catalogue
End mills long, λ 45°, type NR, plain shank, code S111702, diameter 5 mm, coating AlCrN

S111702.050 ALCRN Solid carbide (SC) DIN 6527

Cutting conditions Product attributes

D	d	l₁	l₂	l₃	D_n	Z	Item code	On stock
5	6	57	13	18	4,8	4	S111702.050 ALCRN	No

Cutting conditions

Material	Strenght	A_p	A_e	V_c	fz(mm/z) Ø 3	Ø 6	Ø 8	Ø 10	Ø 12	Ø 16	Ø 18	Ø 20	Ø 25
P.1 \| Free-cutting steels, general construction steels	≤ 600 N/mm²	0.3xD	1xD	210	0.021	0.042	0.056	0.07	0.084	0.112	0.126	0.14	0.175
P.2 \| General construction steels, steel castings	≤ 850 N/mm²	0.3xD	1xD	210	0.021	0.042	0.056	0.07	0.084	0.112	0.126	0.14	0.175
P.3 \| Tool steels low alloyed	≤ 1100 N/mm²	0.3xD	1xD	175	0.021	0.042	0.056	0.07	0.084	0.112	0.126	0.14	0.175
P.4 \| Heat treatable steels	≤ 900 N/mm²	0.3xD	1xD	175	0.021	0.042	0.056	0.07	0.084	0.112	0.126	0.14	0.175
P.5 \| Tool steels high alloyed	≤ 1100 N/mm²	0.3xD	1xD	120	0.021	0.042	0.056	0.07	0.084	0.112	0.126	0.14	0.175
P.6 \| Tool and treated steels	> 1100 N/mm²	0.3xD	1xD	120	0.021	0.042	0.056	0.07	0.084	0.112	0.126	0.14	0.175
K.1 \| Cast iron (≤ 240 HB)	≤ 820 N/mm²	0.3xD	1xD	150	0.021	0.042	0.056	0.07	0.084	0.112	0.126	0.14	0.175
K.2 \| Cast iron (> 240 HB)	> 800 N/mm²	0.3xD	1xD	100	0.021	0.042	0.056	0.07	0.084	0.112	0.126	0.14	0.175
H.1 \| Hardened materials (< 54 HRC)	≤ 1920 N/mm²	0.3xD	1xD	120	0.021	0.042	0.056	0.07	0.084	0.112	0.126	0.14	0.175
H.2 \| Hardened materials (54 - 60 HRC)	1920-2210 N/mm²	0.3xD	1xD	100	0.021	0.042	0.056	0.07	0.084	0.112	0.126	0.14	0.175

Calculations of cutting conditions

Product attributes

Clamping element

more +

Plain straight shank according to DIN 6535 HA.

Tool geometry

more +

Helix angle = 45°. Rake angle = 6°.

End face design

Solid carbide

more +

Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.

Type N

more +

Universal usage. Suitable for materials up to strength 900 MPa.

Feed direction possibility

Air cooling

AlCrN coating

more +

Coating with very high wear resistance and excellent hot hardness.