Single angle milling cutters
ϱ
±20'
D
js 16
S
js 14
d
H 7
Z Item codeOn stock
4540101014853270.045040 Yes
4550131316853270.045050 Yes
4563181618853270.045063 Yes
4580222220853270.045080 Yes
45100282722853270.045100 Yes
45125363224853270.045125 Yes
45160454028853270.045160 Yes
5040131014853270.050040 Yes
5050161316853270.050050 Yes
5063201618853270.050063 Yes
5080252220853270.050080 Yes
50100322722853270.050100 Yes
50125403224853270.050125 Yes
50160504028853270.050160 Yes
5540131014853270.055040 Yes
555061316853270.055050 Yes
5563201618853270.055063 Yes
5580252220853270.055080 Yes
55100322722853270.055100 Yes
55125403224853270.055125 Yes
6040131014853270.060040 Yes
6050161316853270.060050 Yes
6063201618853270.060063 Yes
6080252220853270.060080 Yes
60100322722853270.060100 Yes
60125403226853270.060125 Yes
60160504028853270.060160 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 40

Ø 50

Ø 63

Ø 80

Ø 100

Ø 125

Ø 160
P.1 | Free-cutting steels, general construction steels≤ 600 N/mm²0,8xS1xD300.0250.030.0350.040.0430.0480.052
P.4 | Heat treatable steels≤ 900 N/mm²0,8xS1xD200.0250.030.0350.040.0430.0480.052
K.1 | Cast iron (≤ 240 HB)≤ 820 N/mm²0,8xS1xD250.0250.030.0350.040.0430.0480.052
K.2 | Cast iron (> 240 HB)> 800 N/mm²0,8xS1xD170.0250.030.0350.040.0430.0480.052
N.4 | Cooper-zinc alloys, cooper-tin alloys≤ 800 N/mm²0,8xS1xD50-900.0250.030.0350.040.0430.0480.052

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight bore with standard keyway according to DIN 138.
Tool geometry

Tool geometry

more +
Helix angle = 0°. Rake angle = 2°.
Material HSS

Material HSS

more +
High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Cutting edges on the face and perimeter of the angle cutter.

Cutting edges on the face and perimeter of the angle cutter.