Single angle milling cutters
ϱ
±30'
R D
js 16
S
js 16
d
H 7
Z Item codeOn stock
2016361614852570.020063 Yes
201,5100102718852570.020100 Yes
2516362214852570.025063 Yes
25180102216852570.025080 No
251,5100142718852570.025100 Yes
252125182720852570.025125 Yes
252,5160223222852570.025160 Yes
3016382214852570.030063 Yes
301,5100142718852570.030100 Yes

Cutting conditions


Material

Strength

Ae

Vc
fz(mm/z)
Ø 63

Ø 80

Ø 100

Ø 125

Ø 160
P.1 | Free-cutting steels, general construction steels≤ 600 N/mm²1xS300.0350.040.0430.0480.052
P.4 | Heat treatable steels≤ 900 N/mm²1xS200.0350.040.0430.0480.052
K.1 | Cast iron (≤ 240 HB)≤ 820 N/mm²1xS250.0350.040.0430.0480.052
K.2 | Cast iron (> 240 HB)> 800 N/mm²1xS170.0350.040.0430.0480.052
N.4 | Cooper-zinc alloys, cooper-tin alloys≤ 800 N/mm²1xS50-900.0350.040.0430.0480.052

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight bore with standard keyway according to DIN 138.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Cutting edges on the face and perimeter of the angle cutter.

Cutting edges on the face and perimeter of the angle cutter.

Norm ČSN 222242.

Norm ČSN 222242.

Tool geometry

Tool geometry

more +
Helix angle = 0°. Rake angle = 0°.
Material HSS

Material HSS

more +
High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa.