857075VHigh-speed steel HSS Co5DIN 847
Clamping element
Type N
Tool geometry
Cutting edges on the perimeter of the double angle cutter.
Material HSS Co5
Double angle milling cutters, symmetrical
ϱ
±30'
D
js 16
S d
H 7
Z Item codeOn stock
455081616857075V.045050 Yes
4563102216857075V.045063 Yes
4580122720857075V.045080 Yes
45100183220857075V.045100 Yes
6050101616857075V.060050 Yes
6063142216857075V.060063 Yes
6080182718857075V.060080 Yes
60100253220857075V.060100 Yes
9050141616857075V.090050 Yes
9063202216857075V.090063 Yes
9080222718857075V.090080 Yes
90100323220857075V.090100 Yes

Cutting conditions


Material

Strength

Ap

Vc
fz(mm/z)
Ø 50

Ø 63

Ø 80

Ø 100
P.1 | Free-cutting steels, general construction steels≤ 600 N/mm²0,8xS37.50.030.0350.040.045
P.3 | Tool steels low alloyed≤ 1100 N/mm²0,8xS180.030.0350.040.045
P.4 | Heat treatable steels≤ 900 N/mm²0,8xS250.030.0350.040.045
P.6 | Tool and treated steels> 1100 N/mm²0,8xS160.0210.0250.0280.0315
M.2 | Corrosion- and acid-proof steels750 - 850 N/mm²0,8xS100.030.0350.040.045
K.1 | Cast iron (≤ 240 HB)≤ 820 N/mm²0,8xS300.030.0350.040.045
K.2 | Cast iron (> 240 HB)> 800 N/mm²0,8xS220.030.0350.040.045
N.4 | Cooper-zinc alloys, cooper-tin alloys≤ 800 N/mm²0,8xS60-1000.030.0350.040.045
S.2 | Titanium, Titanium alloys≤ 1250 N/mm²0,8xS90.0210.0250.0280.0315

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight bore with standard keyway according to DIN 138.
Tool geometry

Tool geometry

more +
Helix angle = 0°. Rake angle = 0°.
Material HSS Co5

Material HSS Co5

more +
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Cutting edges on the perimeter of the double angle cutter.

Cutting edges on the perimeter of the double angle cutter.