End mills long, 55°, type N, Weldon shank, coating AlCr
| D e 8 | d h 5 | l1 | l2 | Z | Item code | On stock |
|---|---|---|---|---|---|---|
| 6 | 6 | 57 | 13 | 4 | S152612.060 AlCr | No |
| 8 | 8 | 63 | 19 | 4 | S152612.080 AlCr | No |
| 10 | 10 | 72 | 22 | 4 | S152612.100 AlCr | No |
| 12 | 12 | 83 | 26 | 4 | S152612.120 AlCr | Yes |
| 14 | 14 | 83 | 26 | 4 | S152612.140 AlCr | No |
| 16 | 16 | 92 | 32 | 4 | S152612.160 AlCr | No |
| 18 | 18 | 92 | 32 | 4 | S152612.180 AlCr | No |
| 20 | 20 | 104 | 38 | 4 | S152612.200 AlCr | No |
Cutting conditions
Material | Strength | Ap | Ae | Vc | fz(mm/z) Ø 6 | Ø 8 | Ø 10 | Ø 12 | Ø 16 | Ø 20 |
|---|---|---|---|---|---|---|---|---|---|---|
| M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² | 1,75xD | 0,2xD | 120 | 0.017 | 0.023 | 0.028 | 0.034 | 0.045 | 0.057 |
| M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 1,75xD | 0,2xD | 100 | 0.017 | 0.023 | 0.028 | 0.034 | 0.045 | 0.057 |
| S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 1,75xD | 0,2xD | 70 | 0.017 | 0.023 | 0.028 | 0.034 | 0.045 | 0.057 |
| S.2 | Titanium, titanium alloys | ≤ 1250 N/mm² | 1,75xD | 0,2xD | 90 | 0.017 | 0.023 | 0.028 | 0.034 | 0.045 | 0.057 |
Calculations of cutting conditions
Product attributes
Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Universal usage. Suitable for materials up to strength 900 MPa.
End face design
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Company norm
Feed direction possibility
Oil coolant.
