English
  1. Home
  2. Catalogue
  3. Side and face milling cutters, fine teeth, type H, code 730278, diameter 80 mm, width 7 mm

Side and face milling cutters, fine teeth, type H, code 730278, diameter 80 mm, width 7 mm

730278.08007High-speed steel HSS Co8DIN 885A
Cutting conditions
Side and face milling cutters, fine teeth, type H
D S d Z Item codeOn stock
8072718 730278.08007 Yes

Cutting conditions


Material
Strength
Ap
Ae
Vc		fz(mm/z)
Ø 50
Ø 63
Ø 80
Ø 100
Ø 125
P.1 | Free-cutting steels, general construction steels≤ 600 N/mm²0,1xD1xS450.050.060.070.080.09
P.2 | General construction steels, steel castings≤ 850 N/mm²0,1xD1xS390.050.060.070.080.09
P.3 | Tool steels low alloyed≤ 1100 N/mm²0,1xD1xS240.050.060.070.080.09
P.4 | Heat treatable steels≤ 900 N/mm²0,1xD1xS300.050.060.070.080.09
P.5 | Tool steels high alloyed≤ 1100 N/mm²0,1xD1xS240.050.060.070.080.09
P.6 | Tool and treated steels> 1100 N/mm²0,1xD1xS200.050.060.070.080.09
M.2 | Corrosion- and acid-proof steels750 - 850 N/mm²0,1xD1xS150.050.060.070.080.09
K.1 | Cast iron (≤ 240 HB)≤ 820 N/mm²0,1xD1xS350.050.060.070.080.09
K.2 | Cast iron (> 240 HB)> 800 N/mm²0,1xD1xS250.050.060.070.080.09
N.4 | Cooper-zinc alloys, cooper-tin alloys≤ 800 N/mm²0,1xD1xS80-1200.050.060.070.080.09
S.1 | Chrome-nickel alloys≤ 1500 N/mm²0,1xD1xS120.050.060.070.080.09
S.2 | Titanium, Titanium alloys≤ 1250 N/mm²0,1xD1xS120.050.060.070.080.09

Calculations of cutting conditions

2026 © ZPS-FN a.s. | All right reserved
webdesign by Studio 9