Metal slitting saws, type W, code 722913, diameter 125 mm, width 3 mm
| D | S | d | Z | Item code | On stock |
|---|---|---|---|---|---|
| 125 | 3 | 22 | 48 | 722913.1250300 | Yes |
Cutting conditions
| Material | Strength | ae | vc | fz (mm/z) |
|---|---|---|---|---|
| P.1 | Free-cutting steels, general constronstruction steels | ≤ 600 N/mm² | 1xS | 25 - 50 | 0,03 - 0,06 |
| P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 1xS | 15 - 30 | 0,03 - 0,04 |
| P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 1xS | 10 - 15 | 0,02 - 0,03 |
| P.4 | Heat treatable steels | ≤ 900 N/mm² | 1xS | 10 - 20 | 0,02 - 0,03 |
| P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 1xS | 10 - 15 | 0,02 - 0,03 |
| P.6 | Tool and treated steels | > 1100 N/mm² | 1xS | 5 - 10 | 0,01 - 0,03 |
| K.1 | Cast iron (≤ 240 HB) | ≤ 820 mm² | 1xS | 15 - 25 | 0,04 - 0,05 |
| K.2 | Cast iron (> 240 HB) | > 800 mm² | 1xS | 15 - 25 | 0,04 - 0,05 |
| N.1 | Aluminium, Aluminium cast alloys Si (Si ≤ 6%) | ≤ 400 N/mm² | 1xS | 500 - 1000 | 0,03 - 0,07 |
| N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 1xS | 120 - 200 | 0,03 - 0,07 |
| N.4 | Cooper, Copper–zinc alloys, copper–tin alloys | ≤ 800 N/mm² | 1xS | 100 - 400 | 0,04 - 0,06 |
Recommendation for ap: Suitable for deeper grooves.
Product attributes
Recommended for deeper cuts and for productive cutting of materials (in general for materials with longer chips).
High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa.
