Zahnformfräser für Stirnräder, Winkel 20°
| m |
D
js 16 |
d
H 7 | Z | ae | ZOZ | n | Artikel Nr. | Preis/St. | Auf Lager | Stückzahl | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0,5 | 40 | 16 | 12 | 1,08 | 12-13 | 1 | 890075.00501 | 135,73 € | Ja |
|
|
| 0,5 | 40 | 16 | 12 | 1,08 | 17-20 | 3 | 890075.00503 | 135,73 € | Ja |
|
|
| 0,5 | 40 | 16 | 12 | 1,08 | 26-34 | 5 | 890075.00505 | 135,73 € | Ja |
|
|
| 0,75 | 40 | 16 | 12 | 1,63 | 14-16 | 2 | 890075.00752 | 135,73 € | Ja |
|
|
| 1 | 50 | 16 | 12 | 2,17 | 12-13 | 1 | 890075.01001 | 128,10 € | Ja |
|
|
| 1,5 | 63 | 22 | 12 | 3,25 | 12-13 | 1 | 890075.01501 | 148,21 € | Ja |
|
|
| 1,5 | 63 | 22 | 12 | 3,25 | 17-20 | 3 | 890075.01503 | 148,21 € | Ja |
|
|
| 1,5 | 63 | 22 | 12 | 3,25 | 21-25 | 4 | 890075.01504 | 148,21 € | Ja |
|
|
| 1,75 | 63 | 22 | 12 | 3,79 | 12-13 | 1 | 890075.01751 | 168,69 € | Ja |
|
|
| 1,75 | 63 | 22 | 12 | 3,79 | 35-54 | 6 | 890075.01756 | 168,69 € | Ja |
|
|
| 2,25 | 63 | 22 | 12 | 4,88 | 26-34 | 5 | 890075.02255 | 182,15 € | Ja |
|
|
| 2,5 | 63 | 22 | 12 | 5,42 | 12-13 | 1 | 890075.02501 | 170,37 € | Ja |
|
|
| 2,75 | 70 | 27 | 12 | 5,96 | 26-34 | 5 | 890075.02755 | 228,70 € | Ja |
|
|
| 2,75 | 70 | 27 | 12 | 5,96 | 35-54 | 6 | 890075.02756 | 228,70 € | Ja |
|
|
| 2,75 | 70 | 27 | 12 | 5,96 | 55-134 | 7 | 890075.02757 | 228,70 € | Ja |
|
|
| 2,75 | 70 | 27 | 12 | 5,96 | 135-00 | 8 | 890075.02758 | 228,70 € | Ja |
|
|
| 3 | 70 | 27 | 12 | 6,5 | 12-13 | 1 | 890075.03001 | 206,88 € | Ja |
|
|
| 3,5 | 80 | 27 | 12 | 7,59 | 17-20 | 3 | 890075.03503 | 253,13 € | Ja |
|
|
| 3,5 | 80 | 27 | 12 | 7,59 | 21-25 | 4 | 890075.03504 | 253,13 € | Ja |
|
|
| 3,5 | 80 | 27 | 12 | 7,59 | 26-34 | 5 | 890075.03505 | 253,13 € | Ja |
|
|
| 3,5 | 80 | 27 | 12 | 7,59 | 55-134 | 7 | 890075.03507 | 253,13 € | Ja |
|
|
| 3,5 | 80 | 27 | 12 | 7,59 | 135-00 | 8 | 890075.03508 | 253,13 € | Ja |
|
|
| 3,75 | 80 | 27 | 12 | 8,13 | 12-13 | 1 | 890075.03751 | 300,31 € | Ja |
|
|
| 3,75 | 80 | 27 | 12 | 8,13 | 14-16 | 2 | 890075.03752 | 300,31 € | Ja |
|
|
| 4 | 80 | 27 | 12 | 8,67 | 12-13 | 1 | 890075.04001 | 310,62 € | Ja |
|
|
| 4 | 80 | 27 | 12 | 8,67 | 135-00 | 8 | 890075.04008 | 310,62 € | Ja |
|
|
| 4,5 | 90 | 27 | 12 | 9,75 | 17-20 | 3 | 890075.04503 | 415,53 € | Ja |
|
|
| 4,5 | 90 | 27 | 12 | 9,75 | 21-25 | 4 | 890075.04504 | 415,53 € | Ja |
|
|
| 4,5 | 90 | 27 | 12 | 9,75 | 26-34 | 5 | 890075.04505 | 415,53 € | Ja |
|
|
| 4,5 | 90 | 27 | 12 | 9,75 | 35-54 | 6 | 890075.04506 | 415,53 € | Ja |
|
|
| 4,5 | 90 | 27 | 12 | 9,75 | 55-134 | 7 | 890075.04507 | 415,53 € | Ja |
|
|
| 5 | 90 | 32 | 12 | 10,84 | 12-13 | 1 | 890075.05001 | 466,86 € | Ja |
|
|
| 5 | 90 | 32 | 12 | 10,84 | 26-34 | 5 | 890075.05005 | 466,86 € | Ja |
|
|
| 5 | 90 | 32 | 12 | 10,84 | 135-00 | 8 | 890075.05008 | 466,86 € | Ja |
|
|
| 6 | 100 | 32 | 12 | 13 | 17-20 | 3 | 890075.06003 | 593,59 € | Ja |
|
|
| 6 | 100 | 32 | 12 | 13 | 26-34 | 5 | 890075.06005 | 593,59 € | Ja |
|
|
| 6 | 100 | 32 | 12 | 13 | 35-54 | 6 | 890075.06006 | 593,59 € | Ja |
|
|
| 6 | 100 | 32 | 12 | 13 | 135-00 | 8 | 890075.06008 | 593,59 € | Ja |
|
Anzahl der Zähne (Zahnräder)
| Modul | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| ZOZ | 12-13 | 14-16 | 17-20 | 21-25 | 26-34 | 35-54 | 55-134 | 135-00 |
Schnittbedingungen
Material |
Festigkeit |
Ae |
Vc |
fz(mm/z) Ø 40 |
Ø 50 |
Ø 63 |
Ø 70 |
Ø 80 |
Ø 90 |
Ø 100 |
|---|---|---|---|---|---|---|---|---|---|---|
| Modul 1-5 | ||||||||||
| P.1 | Automatenstähle, allgemeine Baustähle | ≤ 600 N/mm² | 2,1xm | 20 | 0.01 | 0.013 | 0.016 | 0.018 | 0.021 | 0.023 | 0.026 |
| P.2 | Allgemine Baustähle, Stahlguss | ≤ 850 N/mm² | 2,1xm | 15 | 0.01 | 0.013 | 0.016 | 0.018 | 0.021 | 0.023 | 0.026 |
| K.1 | Temperguss (≤ 240 HB) | ≤ 820 N/mm | 2,1xm | 12 | 0.011 | 0.014 | 0.018 | 0.02 | 0.023 | 0.026 | 0.029 |
| K.2 | Temperguss (> 240 HB) | > 800 N/mm² | 2,1xm | 10 | 0.01 | 0.013 | 0.016 | 0.018 | 0.021 | 0.023 | 0.026 |
| Modul 6 | ||||||||||
| P.1 | Automatenstähle, allgemeine Baustähle | ≤ 600 N/mm² | 2,1xm | 20 | 0.026 | 0.033 | 0.041 | 0.046 | 0.053 | 0.059 | 0.066 |
| P.2 | Allgemine Baustähle, Stahlguss | ≤ 850 N/mm² | 2,1xm | 15 | 0.022 | 0.027 | 0.035 | 0.038 | 0.044 | 0.049 | 0.055 |
| K.1 | Temperguss (≤ 240 HB) | ≤ 820 N/mm | 2,1xm | 12 | 0.022 | 0.027 | 0.035 | 0.038 | 0.044 | 0.049 | 0.055 |
| K.2 | Temperguss (> 240 HB) | > 800 N/mm² | 2,1xm | 10 | 0.021 | 0.026 | 0.033 | 0.037 | 0.042 | 0.047 | 0.053 |
Berechnungen Schnittbedingungen
Produkteingeschaften
Zylindrische Bohrung mit Längsnut nach DIN 138.
Drallwinkel = 0°.
Spanwinkel = 0°.