End mill long, 1 tooth cut over centre, 20°, type W, Weldon shank, code C121312, diameter 12 mm
D
h10 | d | l1 | l2 | Z | Item code | On stock |
---|---|---|---|---|---|---|
12 | 12 | 83 | 26 | 3 | C121312.120 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø3 |
Ø4 |
Ø5 |
Ø6 |
Ø8 |
Ø10 |
Ø12 |
Ø14 |
---|---|---|---|---|---|---|---|---|---|---|---|---|
N.1 | Aluminium, Aluminium cast alloys Si (Si ≤ 6%) | ≤ 400 N/mm² | 0,3xD | 1,5xD | 250 | 0,0225 | 0,03 | 0,0375 | 0,045 | 0,06 | 0,075 | 0,09 | 0,105 |
N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 0,3xD | 1,5xD | 200 | 0,0225 | 0,03 | 0,0375 | 0,045 | 0,06 | 0,075 | 0,09 | 0,105 |
N.4 | Cooper-zinc alloys, cooper-tin alloys | ≤ 800 N/mm² | 0,3xD | 1,5xD | 200 | 0,0225 | 0,03 | 0,0375 | 0,045 | 0,06 | 0,075 | 0,09 | 0,105 |
Calculations of cutting conditions
Product attributes
Clamping element
more +Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Tool geometry
more +Lead of helix 20°.
End face design
Solid carbide
more +Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Type W
more +For machining of soft materials, for example aluminium and non-ferrous metals.