Extra long twist drills with inner cooling, 25xD, coating AlTiN
| D | l1 | l2 | Item code | On stock |
|---|---|---|---|---|
| 3 | 130 | 85,5 | S90112.030 ALTIN | No |
| 3,2 | 140 | 95,5 | S90112.032 ALTIN | No |
| 3,5 | 150 | 100,5 | S90112.035 ALTIN | No |
| 3,8 | 150 | 100,5 | S90112.038 ALTIN | No |
| 4 | 160 | 110,5 | S90112.040 ALTIN | No |
| 4,2 | 170 | 120,5 | S90112.042 ALTIN | No |
| 4,5 | 180 | 130,5 | S90112.045 ALTIN | No |
| 4,8 | 190 | 140,5 | S90112.048 ALTIN | No |
| 5 | 190 | 140,5 | S90112.050 ALTIN | No |
| 5,5 | 210 | 160,5 | S90112.055 ALTIN | No |
| 6 | 220 | 170,5 | S90112.060 ALTIN | No |
| 6,5 | 230 | 191 | S90112.065 ALTIN | No |
| 7 | 240 | 201 | S90112.070 ALTIN | No |
| 7,5 | 250 | 214 | S90112.075 ALTIN | No |
| 8 | 260 | 224 | S90112.080 ALTIN | No |
| 8,5 | 280 | 237 | S90112.085 ALTIN | No |
| 9 | 290 | 247 | S90112.090 ALTIN | No |
| 9,5 | 310 | 267 | S90112.098 ALTIN | No |
| 10 | 310 | 267 | S90112.100 ALTIN | No |
Cutting conditions
Material |
Strenght |
Vc |
fz(mm/r) Ø3 |
Ø5 |
Ø8 |
Ø10 |
Ø12 |
Ø15 |
Ø17 |
Ø20 |
|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 77 | 0,125 | 0,16 | 0,25 | 0,315 | 0,315 | 0,315 | 0,4 | 0,5 |
| P.4 | Heat treatable steels | ≤ 900 N/mm² | 72 | 0,125 | 0,16 | 0,25 | 0,315 | 0,315 | 0,315 | 0,4 | 0,5 |
| P.6 | Tool and treated steels | > 1100 N/mm² | 46 | 0,063 | 0,08 | 0,125 | 0,16 | 0,16 | 0,16 | 0,2 | 0,25 |
| M.1 | Corrosion- and acid-proof steels | ≤ 750 N/mm² | 35 | 0,07 | 0,05 | 0,1 | 0,125 | 0,125 | 0,125 | 0,16 | 0,2 |
| K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² | 63 | 0,125 | 0,16 | 0,25 | 0,315 | 0,315 | 0,315 | 0,4 | 0,5 |
| K.2 | Cast iron (> 240 HB) | > 800 N/mm² | 49 | 0,063 | 0,08 | 0,125 | 0,16 | 0,16 | 0,16 | 0,2 | 0,25 |
Calculations of cutting conditions
Product attributes
Plain straight shank according to DIN 6535 HA.
Point angle 135°
Right helix
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Lead of helix 30°.
Drilling depth 25xD
With coolant holes
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.