End mills short with corner radius, fine teeth, λ 50°, type H, plain shank, coating TiSiN
| D | d | l1 | l2 | l3 | Dn | R | Z | Item code | On stock |
|---|---|---|---|---|---|---|---|---|---|
| 3 | 6 | 57 | 8 | 14 | 2,8 | 0,3 | 6 | S151702R.030 TISIN | Yes |
| 4 | 6 | 57 | 11 | 16 | 3,8 | 0,3 | 6 | S151702R.040 TISIN | Yes |
| 5 | 6 | 57 | 13 | 18 | 4,8 | 0,3 | 6 | S151702R.050 TISIN | Yes |
| 6 | 6 | 57 | 13 | 19 | 5,7 | 0,5 | 6 | S151702R.060 TISIN | Yes |
| 8 | 8 | 63 | 19 | 25 | 7,6 | 0,5 | 6 | S151702R.080 TISIN | Yes |
| 10 | 10 | 72 | 22 | 30 | 9,5 | 1 | 6 | S151702R.100 TISIN | Yes |
| 12 | 12 | 83 | 26 | 36 | 11,5 | 1 | 6 | S151702R.120 TISIN | Yes |
| 16 | 16 | 92 | 32 | 42 | 15,5 | 1 | 8 | S151702R.160 TISIN | Yes |
| 20 | 20 | 104 | 38 | 52 | 19,5 | 2 | 10 | S151702R.200 TISIN | Yes |
Cutting conditions
Materiál |
Pevnosť |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 4 |
Ø 5 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 20 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| H.1 | Hardened materials (< 54 HRC) | ≤ 1920 N/mm² | 1xD | 0.2xD | 220 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 | 0.12 | 0.16 | 0.2 |
| H.2 | Hardened materials (54 - 60 HRC) | 1920-2210 N/mm² | 1xD | 0.2xD | 190 | 0.03 | 0.04 | 0.05 | 0.06 | 0.08 | 0.1 | 0.12 | 0.16 | 0.2 |
Calculations of cutting conditions
Product attributes
Plain straight shank according to DIN 6535 HA.
Helix angle = 50°.
Rake angle = 10°.
End face design - radius
Coating with excellent hardness, high heat and oxidation resistance.It is usually applied to high-speed cutting tools used on CNC machines for machining hardened steels from 50 to 65 HRC.
Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.
Feed direction possibility
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.