730275.10014 High-speed steel HSS Co5 DIN 885A
Clamping element
Type H
Tool geometry
Cutting edges on the face and perimeter of the side and face cutter
Material HSS Co5
D
js 16
S
k 11
d
H 7
Z Item code On stock
100 14 32 20 730275.10014 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 50

Ø 63

Ø 80

Ø 100

Ø 125

Ø 160

Ø 200
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 0,1xD 1xS 37.5 0.05 0.06 0.07 0.08 0.09 0.092 0.095
P.2 | General construction steels, steel castings ≤ 850 N/mm² 0,1xD 1xS 32.5 0.05 0.06 0.07 0.08 0.09 0.092 0.095
P.4 | Heat treatable steels ≤ 900 N/mm² 0,1xD 1xS 25 0.05 0.06 0.07 0.08 0.09 0.092 0.095
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 0,1xD 1xS 18 0.05 0.06 0.07 0.08 0.09 0.092 0.095
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 0,1xD 1xS 10 0.05 0.06 0.07 0.08 0.09 0.092 0.095
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 0,1xD 1xS 30 0.05 0.06 0.07 0.08 0.09 0.092 0.095
K.2 | Cast iron (> 240 HB) > 800 N/mm² 0,1xD 1xS 22 0.05 0.06 0.07 0.08 0.09 0.092 0.095
N.4 | Cooper-zinc alloys, cooper-tin alloys ≤ 800 N/mm² 0,1xD 1xS 60-100 0.05 0.06 0.07 0.08 0.09 0.092 0.095

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight bore with standard keyway according to DIN 138.
Tool geometry

Tool geometry

more +
Helix angle = 10°. Rake angle = 8°.
Material HSS Co5

Material HSS Co5

more +
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Type H

Type H

more +
Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.
Cutting edges on the face and perimeter of the side and face cutter

Cutting edges on the face and perimeter of the side and face cutter