S131602Solid carbide (SC)DIN 6527L
Clamping element
Type H
Tool geometry
Feed direction possibility
End face design
Oil coolant.
Solid carbide
Coating AlTiN
End mills long, fine teeth, 45°, type H, plain shank, coating AlTiN
D
h 10
d
h 6
l1 l2 Z Item codeOn stock
6657136 S131602.060 Yes
8863196 S131602.080 No
101072226 S131602.100 Yes
121283266 S131602.120 Yes
141483266 S131602.140 Yes
161692326 S131602.160 Yes
181892328 S131602.180 Yes
2020104388 S131602.200 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels≤ 600 N/mm²1,75xD0,05xD1800.030.040.050.060.080.090.1
P.3 | Tool steels low alloyed≤ 1100 N/mm²1,75xD0,05xD1000.030.040.050.060.080.090.1
P.5 | Tool steels high alloyed≤ 1100 N/mm²1,75xD0,05xD800.030.040.050.060.080.090.1
M.1 | Corrosion- and acid-proof steels≤ 750 N/mm²1,75xD0,05xD900.030.040.050.060.080.090.1
M.2 | Corrosion- and acid-proof steels750 - 850 N/mm²1,75xD0,05xD800.030.040.050.060.080.090.1
K.1 | Cast iron (≤ 240 HB)≤ 820 N/mm²1,75xD0,05xD1400.030.040.050.060.080.090.1
K.2 | Cast iron (> 240 HB)> 800 N/mm²1,75xD0,05xD1000.030.040.050.060.080.090.1
S.1 | Chrome-nickel alloys≤ 1500 N/mm²1,75xD0,05xD500.030.040.050.060.080.090.1
S.2 | Titanium, titanium alloys≤ 1250 N/mm²1,75xD0,05xD700.030.040.050.060.080.090.1
H.1 | Hardened materials (< 54 HRC)≤ 1920 N/mm²1,75xD0,05xD800.030.040.050.060.080.090.1

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Plain straight shank according to DIN 6535 HA.
Tool geometry

Tool geometry

more +
Helix angle = 45°. Rake angle = 12°.
End face design

End face design

Solid carbide

Solid carbide

more +
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Type H

Type H

more +
Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.
Feed direction possibility

Feed direction possibility

Oil coolant.

Oil coolant.

Coating AlTiN

Coating AlTiN

more +
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.