S119612N.160Z5 AlCrN Solid carbide (SC)
Clamping element
Company norm
Type HR
Tool geometry
Feed direction possibility
End face design
Air cooling
Solid carbide
AlCrN coating
D
h 10
d
h 6
l1 l2 l3 Dn Z Item code On stock
16 16 92 32 42 15,5 5 S119612N.160Z5 AlCrN No

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 4

Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1,5xD 0,4xD 210 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1,5xD 0,4xD 175 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1,5xD 0,4xD 120 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
M.1 | Corrosion- and acid-proof steels ≤ 750 N/mm² 1,5xD 0,4xD 110 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 1,5xD 0,4xD 90 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 1,5xD 0,4xD 150 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
K.2 | Cast iron (> 240 HB) > 800 N/mm² 1,5xD 0,4xD 110 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 1,5xD 0,4xD 50 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
S.2 | Titanium, titanium alloys ≤ 1250 N/mm² 1,5xD 0,4xD 70 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
H.1 | Hardened materials (< 54 HRC) ≤ 1920 N/mm² 1,5xD 0,4xD 120 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11
H.2 | Hardened materials (54 - 60 HRC) 1920 - 2210 N/mm² 1,5xD 0,4xD 100 0.02 0.03 0.04 0.055 0.065 0.085 0.1 0.11

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
Type HR

Type HR

more +
For roughing operation and materials of medium and higher strength (up to 1200 MPa), surface roughness Ra 6,3 and more.
Feed direction possibility

Feed direction possibility

Air cooling

Air cooling

AlCrN coating

AlCrN coating

more +
Coating with very high wear resistance and excellent hot hardness.
Company norm

Company norm

Tool geometry

Tool geometry

more +
Helix angle = 45°. Rake angle = 6°.
End face design

End face design

Solid carbide

Solid carbide

more +
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.