S141402Solid carbide (SC)DIN 6527L
Clamping element
Type N
Tool geometry
Feed direction possibility
End face design
Oil coolant.
Solid carbide
Coating AlTiN
End mills long, 1 tooth cut over centre, 45°, type N, plain shank, coating AlTiN
D
h 10
d
h 6
l1 l2 Z Item codeOn stock
365773 S141402.030 Yes
3,565773 S141402.035 No
465783 S141402.040 No
4,565783 S141402.045 No
5657103 S141402.050 Yes
6657103 S141402.060 Yes
8863163 S141402.080 No
101072193 S141402.100 Yes
121283223 S141402.120 No
141483223 S141402.140 Yes
161692263 S141402.160 Yes
181892263 S141402.180 No
2020104323 S141402.200 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 3

Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20
P.1 | Free-cutting steels, general construction steels≤ 600 N/mm²1,5xD0,2xD1800.020.040.0530.0670.080.1070.120.133
P.3 | Tool steels low alloyed≤ 1100 N/mm²1,5xD0,2xD1000.020.040.0530.0670.080.1070.120.133
P.5 | Tool steels high alloyed≤ 1100 N/mm²1,5xD0,2xD800.020.040.0530.0670.080.1070.120.133
M.1 | Corrosion- and acid-proof steels≤ 750 N/mm²1,5xD0,2xD900.020.040.0530.0670.080.1070.120.133
M.2 | Corrosion- and acid-proof steels750 - 850 N/mm²1,5xD0,2xD800.020.040.0530.0670.080.1070.120.133
K.1 | Cast iron (≤ 240 HB)≤ 820 N/mm²1,5xD0,2xD1400.020.040.0530.0670.080.1070.120.133
K.2 | Cast iron (> 240 HB)> 800 N/mm²1,5xD0,2xD1000.020.040.0530.0670.080.1070.120.133
S.1 | Chrome-nickel alloys≤ 1500 N/mm²1,5xD0,2xD500.020.040.0530.0670.080.1070.120.133
S.2 | Titanium, titanium alloys≤ 1250 N/mm²1,5xD0,2xD700.020.040.0530.0670.080.1070.120.133

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Plain straight shank according to DIN 6535 HA.
Tool geometry

Tool geometry

more +
Helix angle = 45°. Rake angle = 12°.
End face design

End face design

Solid carbide

Solid carbide

more +
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

Oil coolant.

Oil coolant.

Coating AlTiN

Coating AlTiN

more +
Offers similar qualities as TiAlN, but even higher hardness. Substanial temperature stability. Designed for the most demanding applications. It provides excellent result mainly when combined with HSSE-PM steels (ASP 2030). The milling cutters manufactured from this steel are coated with AlTiN as standard.