End mills long, 1 tooth cut over centre, 25°, type WR, Weldon shank
| D h 10 | d h 6 | l1 | l2 | Z | Item code | On stock |
|---|---|---|---|---|---|---|
| 6 | 6 | 57 | 13 | 3 | S115412.060 | Yes |
| 8 | 8 | 63 | 19 | 3 | S115412.080 | Yes |
| 10 | 10 | 72 | 22 | 3 | S115412.100 | Yes |
| 12 | 12 | 83 | 26 | 3 | S115412.120 | Yes |
| 14 | 14 | 83 | 26 | 3 | S115412.140 | No |
| 16 | 16 | 92 | 32 | 3 | S115412.160 | Yes |
| 18 | 18 | 92 | 32 | 3 | S115412.180 | Yes |
| 20 | 20 | 104 | 38 | 3 | S115412.200 | No |
Cutting conditions
Material | Strength | Ap | Ae | Vc | fz(mm/z) Ø 6 | Ø 8 | Ø 10 | Ø 12 | Ø 16 | Ø 18 | Ø 20 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| N.1 | Aluminium, Aluminium cast alloys Si (Si ≤ 6%) | ≤ 400 N/mm² | 2xD | 0,4xD | 160 | 0.055 | 0.073 | 0.092 | 0.11 | 0.147 | 0.165 | 0.183 |
| N.2 | Aluminium cast alloys Si (Si ≤ 12%) | ≤ 600 N/mm² | 2xD | 0,4xD | 220 | 0.055 | 0.073 | 0.092 | 0.11 | 0.147 | 0.165 | 0.183 |
Product attributes
Straight shank with clamping flat (Weldon) according to DIN 6535 HB.
For roughing operation and materials of lower and medium strenght.
Feed direction possibility
