722913.1000060 High-speed steel HSS DIN 1838
Type W
Cutting edges on the face and perimeter of the side and face cutter
Material HSS
D S d Z Item code On stock
100 0,6 22 80 722913.1000060 Yes

Cutting conditions

Material Strength ae vc fz (mm/z)
P.1 | Free-cutting steels, general constronstruction steels ≤ 600 N/mm² 1xS 25 - 50 0,03 - 0,06
P.2 | General construction steels, steel castings ≤ 850 N/mm² 1xS 15 - 30 0,03 - 0,04
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1xS 10 - 15 0,02 - 0,03
P.4 | Heat treatable steels ≤ 900 N/mm² 1xS 10 - 20 0,02 - 0,03
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1xS 10 - 15 0,02 - 0,03
P.6 | Tool and treated steels > 1100 N/mm² 1xS 5 - 10 0,01 - 0,03
K.1 | Cast iron (≤ 240 HB) ≤ 820 mm² 1xS 15 - 25 0,04 - 0,05
K.2 | Cast iron (> 240 HB) > 800 mm² 1xS 15 - 25 0,04 - 0,05
N.1 | Aluminium, Aluminium cast alloys Si (Si ≤ 6%) ≤ 400 N/mm² 1xS 500 - 1000 0,03 - 0,07
N.2 | Aluminium cast alloys Si (Si ≤ 12%) ≤ 600 N/mm² 1xS 120 - 200 0,03 - 0,07
N.4 | Cooper, Copper–zinc alloys, copper–tin alloys ≤ 800 N/mm² 1xS 100 - 400 0,04 - 0,06

Recommendation for ap: Suitable for deeper grooves.

Calculations of cutting conditions

Product attributes

Type W

Type W

more +
Recommended for deeper cuts and for productive cutting of materials (in general for materials with longer chips).
Material HSS

Material HSS

more +
High speed steel of average performance, it is applicable especially for cutters of smaller diameters and for milling of materials up to the strength of 900 MPa.
Cutting edges on the face and perimeter of the side and face cutter

Cutting edges on the face and perimeter of the side and face cutter