Side and face milling cutters, fine teeth, type H
|
D
js 16 |
S
k 11 |
d
H 7 | Z | Item code | On stock |
|---|---|---|---|---|---|
| 50 | 4 | 16 | 14 | 730278.05004 | Yes |
| 50 | 5 | 16 | 14 | 730278.05005 | Yes |
| 50 | 6 | 16 | 14 | 730278.05006 | Yes |
| 50 | 10 | 16 | 14 | 730278.05010 | Yes |
| 63 | 4 | 22 | 16 | 730278.06304 | Yes |
| 63 | 5 | 22 | 16 | 730278.06305 | Yes |
| 63 | 7 | 22 | 16 | 730278.06307 | Yes |
| 63 | 9 | 22 | 16 | 730278.06309 | Yes |
| 63 | 10 | 22 | 16 | 730278.06310 | Yes |
| 63 | 12 | 22 | 16 | 730278.06312 | Yes |
| 63 | 14 | 22 | 16 | 730278.06314 | Yes |
| 63 | 16 | 22 | 16 | 730278.06316 | Yes |
| 80 | 4 | 27 | 18 | 730278.08004 | Yes |
| 80 | 5 | 27 | 18 | 730278.08005 | Yes |
| 80 | 6 | 27 | 18 | 730278.08006 | Yes |
| 80 | 7 | 27 | 18 | 730278.08007 | Yes |
| 80 | 8 | 27 | 18 | 730278.08008 | Yes |
| 80 | 9 | 27 | 18 | 730278.08009 | Yes |
| 80 | 10 | 27 | 18 | 730278.08010 | Yes |
| 80 | 12 | 27 | 18 | 730278.08012 | Yes |
| 80 | 14 | 27 | 18 | 730278.08014 | Yes |
| 80 | 16 | 27 | 18 | 730278.08016 | Yes |
| 80 | 18 | 27 | 16 | 730278.08018 | Yes |
| 80 | 20 | 27 | 16 | 730278.08020 | Yes |
| 100 | 4 | 32 | 20 | 730278.10004 | Yes |
| 100 | 5 | 32 | 20 | 730278.10005 | Yes |
| 100 | 6 | 32 | 20 | 730278.10006 | Yes |
| 100 | 7 | 32 | 20 | 730278.10007 | Yes |
| 100 | 8 | 32 | 20 | 730278.10008 | Yes |
| 100 | 9 | 32 | 20 | 730278.10009 | Yes |
| 100 | 10 | 32 | 20 | 730278.10010 | Yes |
| 100 | 12 | 32 | 20 | 730278.10012 | Yes |
| 100 | 14 | 32 | 20 | 730278.10014 | Yes |
| 100 | 16 | 32 | 20 | 730278.10016 | Yes |
| 100 | 18 | 32 | 20 | 730278.10018 | Yes |
| 100 | 20 | 32 | 20 | 730278.10020 | Yes |
| 100 | 22 | 32 | 18 | 730278.10022 | Yes |
| 100 | 25 | 32 | 18 | 730278.10025 | Yes |
| 125 | 10 | 32 | 22 | 730278.12510 | Yes |
| 125 | 12 | 32 | 22 | 730278.12512 | Yes |
| 125 | 14 | 32 | 22 | 730278.12514 | Yes |
| 125 | 16 | 32 | 22 | 730278.12516 | Yes |
| 125 | 18 | 32 | 22 | 730278.12518 | Yes |
| 125 | 20 | 32 | 22 | 730278.12520 | Yes |
| 125 | 22 | 32 | 20 | 730278.12522 | Yes |
| 125 | 25 | 32 | 20 | 730278.12525 | Yes |
| 160 | 6 | 40 | 24 | 730278.16006 | Yes |
| 160 | 8 | 40 | 24 | 730278.16008 | Yes |
| 160 | 10 | 40 | 24 | 730278.16010 | Yes |
| 160 | 12 | 40 | 24 | 730278.16012 | Yes |
| 160 | 14 | 40 | 24 | 730278.16014 | Yes |
| 160 | 16 | 40 | 24 | 730278.16016 | Yes |
| 160 | 18 | 40 | 24 | 730278.16018 | Yes |
| 160 | 20 | 40 | 24 | 730278.16020 | Yes |
| 160 | 22 | 40 | 22 | 730278.16022 | Yes |
| 160 | 25 | 40 | 22 | 730278.16025 | Yes |
| 200 | 8 | 40 | 30 | 730278.20008 | Yes |
| 200 | 10 | 40 | 30 | 730278.20010 | Yes |
| 200 | 14 | 40 | 30 | 730278.20014 | Yes |
| 200 | 16 | 40 | 30 | 730278.20016 | Yes |
| 200 | 18 | 40 | 30 | 730278.20018 | Yes |
| 200 | 20 | 40 | 30 | 730278.20020 | Yes |
| 200 | 22 | 40 | 28 | 730278.20022 | Yes |
| 200 | 25 | 40 | 28 | 730278.20025 | Yes |
Cutting conditions
Material |
Strength |
Ap |
Ae |
Vc |
fz(mm/z) Ø 50 |
Ø 63 |
Ø 80 |
Ø 100 |
Ø 125 |
|---|---|---|---|---|---|---|---|---|---|
| P.1 | Free-cutting steels, general construction steels | ≤ 600 N/mm² | 0,1xD | 1xS | 45 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| P.2 | General construction steels, steel castings | ≤ 850 N/mm² | 0,1xD | 1xS | 39 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| P.3 | Tool steels low alloyed | ≤ 1100 N/mm² | 0,1xD | 1xS | 24 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| P.4 | Heat treatable steels | ≤ 900 N/mm² | 0,1xD | 1xS | 30 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| P.5 | Tool steels high alloyed | ≤ 1100 N/mm² | 0,1xD | 1xS | 24 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| P.6 | Tool and treated steels | > 1100 N/mm² | 0,1xD | 1xS | 20 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| M.2 | Corrosion- and acid-proof steels | 750 - 850 N/mm² | 0,1xD | 1xS | 15 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| K.1 | Cast iron (≤ 240 HB) | ≤ 820 N/mm² | 0,1xD | 1xS | 35 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| K.2 | Cast iron (> 240 HB) | > 800 N/mm² | 0,1xD | 1xS | 25 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| N.4 | Cooper-zinc alloys, cooper-tin alloys | ≤ 800 N/mm² | 0,1xD | 1xS | 80-120 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| S.1 | Chrome-nickel alloys | ≤ 1500 N/mm² | 0,1xD | 1xS | 12 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
| S.2 | Titanium, Titanium alloys | ≤ 1250 N/mm² | 0,1xD | 1xS | 12 | 0.05 | 0.06 | 0.07 | 0.08 | 0.09 |
Calculations of cutting conditions
Product attributes
Straight bore with standard keyway according to DIN 138.
Helix angle = 10°.
Rake angle = 10°.
Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.
Designed for milling (finishing) of materials of medium and higher strength (up to 1200 MPa). Surface roughness Ra 3,2; exceptionally even 1,6.
