624278PV High-speed steel HSS Co8 DIN 1880
Clamping element
Type NR-F
Tool geometry
Feed direction possibility
Material HSS Co8
D
js 16
d l1 Z Item code On stock
40 16 32 6 624278PV.040 Yes
50 22 36 6 624278PV.050 Yes
63 27 40 8 624278PV.063 Yes
80 27 45 8 624278PV.080 Yes
100 32 50 10 624278PV.100 No
125 40 56 12 624278PV.125 Yes
160 50 63 14 624278PV.160 No

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 40

Ø 50

Ø 63

Ø 80

Ø 100

Ø 125

Ø 160
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 0,8xl1 0,75xD 45 0.096 0.102 0.12 0.132 0.138 0.14 0.144
P.2 | General construction steels, steel castings ≤ 850 N/mm² 0,8xl1 0,75xD 39 0.096 0.102 0.12 0.132 0.138 0.14 0.144
P.4 | Heat treatable steels ≤ 900 N/mm² 0,8xl1 0,75xD 30 0.096 0.102 0.12 0.132 0.138 0.14 0.144
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 0,8xl1 0,75xD 15 0.096 0.102 0.12 0.132 0.138 0.14 0.144
K.2 | Cast iron (> 240 HB) > 800 N/mm² 0,8xl1 0,75xD 25 0.096 0.102 0.12 0.132 0.138 0.14 0.144

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight bore with standard keyway and driving slot according to DIN 138.
Tool geometry

Tool geometry

more +
Helix angle = 30°. Rake angle = 12°.
Material HSS Co8

Material HSS Co8

more +
Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.
Type NR-F

Type NR-F

more +
For machining of materials of lower and medium strength (up to 700 MPa), surface roughness Ra 3,2 and more, in common application can be applied as roughing and finishing tool at the same time.
Feed direction possibility

Feed direction possibility