410245 High-speed steel HSS Co5 DIN 845
Clamping element
Type W
Tool geometry
Feed direction possibility
Material HSS Co5
Tapper shank end mills short, coarse teeth, 45°, type W
D
k 10
MK l1 l2 Z Item code On stock
10 1 92 22 3 410245.100 Yes
12 2 111 26 3 410245.120 Yes
16 2 117 32 3 410245.160 Yes
20 2 123 38 3 410245.200 Yes
22 2 123 38 3 410245.220 Yes
24 3 147 45 4 410245.240 Yes
24 3 147 45 4 410245.240 Yes
25 3 147 45 4 410245.250 Yes
26 3 147 45 4 410245.260 Yes
26 3 147 45 4 410245.260 Yes
28 3 147 45 4 410245.280 Yes
30 3 147 45 4 410245.300 No
32 4 178 53 4 410245.320 Yes
36 4 178 53 4 410245.360 Yes
40 4 188 63 4 410245.400 Yes
45 4 188 63 4 410245.450 Yes
50 5 233 75 5 410245.500 Yes
63 5 248 90 6 410245.630 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 12

Ø 16

Ø 20

Ø 25

Ø 32

Ø 40

Ø 50
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1xD 0,1xD 30 0.034 0.044 0.057 0.071 0.08 0.11 0.12
P.2 | General construction steels, steel castings ≤ 850 N/mm² 1xD 0,1xD 26 0.034 0.044 0.057 0.071 0.08 0.11 0.12
P.4 | Heat treatable steels ≤ 900 N/mm² 1xD 0,1xD 24 0.034 0.044 0.057 0.071 0.08 0.11 0.12
K.1 | Cast iron (< 240 HB) ≤ 820 N/mm² 1xD 0,1xD 25 0.034 0.044 0.057 0.071 0.08 0.11 0.12
N.2 | Aluminium cast alloys Si (Si ≤ 12%) ≤ 600 N/mm² 1xD 0,1xD 140-240 0.024 0.031 0.04 0.05 0.056 0.077 0.08
N.4 | Cooper-zinc alloys, cooper-tin alloys ≤ 800 N/mm² 1xD 0,1xD 50-90 0.034 0.044 0.057 0.071 0.08 0.11 0.12

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Morse taper shank according to DIN 228 A.
Tool geometry

Tool geometry

more +
Helix angle = 45°. Rake angle = 22°.
Material HSS Co5

Material HSS Co5

more +
Very high performance high speed steel with good toughness for milling cutters and for milling of materials up to the strength of 1200 MPa.
Type W

Type W

more +
For machining of soft materials, for example aluminium and non-ferrous metals.
Feed direction possibility

Feed direction possibility