230418.197 TiAlN High-speed steel HSS Co8 DIN 327K
Clamping element
Type N
Tool geometry
Feed direction possibility
Material HSS Co8
TiAlN coating.
D
e 8
d
h 6
l1 l2 Z Item code On stock
19,7 20 88 22 3 230418.197 TiAlN Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 3

Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20

Ø 25

Ø 32
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 0,5xD 1xD 67.5 0.009 0.022 0.029 0.036 0.044 0.058 0.065 0.073 0.091 0.116
P.2 | General construction steels, steel castings ≤ 850 N/mm² 0,5xD 1xD 58.5 0.009 0.022 0.029 0.036 0.044 0.058 0.065 0.073 0.091 0.116
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 0,5xD 1xD 36 0.009 0.022 0.029 0.036 0.044 0.058 0.065 0.073 0.091 0.116
P.4 | Heat treatable steels ≤ 900 N/mm² 0,5xD 1xD 45 0.009 0.022 0.029 0.036 0.044 0.058 0.065 0.073 0.091 0.116
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 0,5xD 1xD 22.5 0.009 0.022 0.029 0.036 0.044 0.058 0.065 0.073 0.091 0.116
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 0,5xD 1xD 52.5 0.009 0.022 0.029 0.036 0.044 0.058 0.065 0.073 0.091 0.116
K.2 | Cast iron (> 240 HB) > 800 N/mm² 0,5xD 1xD 37.5 0.009 0.022 0.029 0.036 0.044 0.058 0.065 0.073 0.091 0.116
N.2 | Aluminium cast alloys Si (Si ≤ 12%) ≤ 600 N/mm² 0,5xD 1xD 240-450 0.0117 0.0286 0.0377 0.0468 0.0572 0.0754 0.0845 0.0949 0.1183 0.1508
N.4 | Copper–zinc alloys, copper–tin alloys ≤ 800 N/mm² 0,5xD 1xD 120-180 0.009 0.022 0.029 0.036 0.044 0.058 0.065 0.073 0.091 0.116
S.2 | Titanium, Titanium alloys ≤ 1250 N/mm² 0,5xD 1xD 18 0.0063 0.0154 0.0203 0.0252 0.0308 0.0406 0.0455 0.0511 0.0637 0.0812

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Tool geometry

Tool geometry

more +
Helix angle = 30°. Rake angle = 12°.
Material HSS Co8

Material HSS Co8

more +
Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility

TiAlN coating.

TiAlN coating.

more +
Its advantage is in high hardness in higher temperaures, good oxidation resistance and low temperature conductivity. Universal usage with emphasis on high-speed miling without cooling. Siutable for milling of hard materials.