141618.060 High-speed steel HSS Co8 DIN 844L
Clamping element
Type N
Tool geometry
Feed direction possibility
Material HSS Co8
D
k 10
d
h 6
l1 l2 Z Item code On stock
6 6 68 24 4 141618.060 Yes

Cutting conditions


Material

Strength

Ap

Ae

Vc
fz(mm/z)
Ø 3

Ø 6

Ø 8

Ø 10

Ø 12

Ø 16

Ø 18

Ø 20

Ø 25

Ø 32
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm² 1,5xD 0,1xD 45 0.0048 0.012 0.0168 0.0224 0.0272 0.0352 0.0408 0.0456 0.0568 0.0728
P.2 | General construction steels, steel castings ≤ 850 N/mm² 1,5xD 0,1xD 39 0.0048 0.012 0.0168 0.0224 0.0272 0.0352 0.0408 0.0456 0.0568 0.0728
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 1,5xD 0,1xD 24 0.0048 0.012 0.0168 0.0224 0.0272 0.0352 0.0408 0.0456 0.0568 0.0728
P.4 | Heat treatable steels ≤ 900 N/mm² 1,5xD 0,1xD 30 0.0048 0.012 0.0168 0.0224 0.0272 0.0352 0.0408 0.0456 0.0568 0.0728
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 1,5xD 0,1xD 24 0.0048 0.012 0.0168 0.0224 0.0272 0.0352 0.0408 0.0456 0.0568 0.0728
K.1 | Cast iron (≤ 240 HB) ≤ 820 N/mm² 1,5xD 0,1xD 35 0.0048 0.012 0.0168 0.0224 0.0272 0.0352 0.0408 0.0456 0.0568 0.0728
N.4 | Copper–zinc alloys, copper–tin alloys ≤ 800 N/mm² 1,5xD 0,1xD 80-120 0.0048 0.012 0.0168 0.0224 0.0272 0.0352 0.0408 0.0456 0.0568 0.0728
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 1,5xD 0,1xD 12 0.00336 0.0084 0.01176 0.01568 0.01904 0.02464 0.02856 0.03192 0.03976 0.05096

Calculations of cutting conditions

Product attributes

Clamping element

Clamping element

more +
Straight shank with clamping flat (Weldon) according to DIN 1835 B.
Tool geometry

Tool geometry

more +
Helix angle = 40°. Rake angle = 12°.
Material HSS Co8

Material HSS Co8

more +
Extra high performance high speed steel with good toughness and great temperature resistance. It is applicable especially for milling of materials with high strength, austenitic steels, steels for warm working, etc.
Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Feed direction possibility

Feed direction possibility