C10012.055 Solid carbide (SC)
Type N
Point angle 118°
Drilling depth 5xD
Right helix
Oil coolant.
Solid carbide
D d l1 l2 Item code On stock
5,5 5,5 93 57 C10012.055 Yes

Cutting conditions


Material

Strength

Vc
fz(mm/r)
Ø1

Ø2

Ø3,15

Ø4

Ø5

Ø6,3

Ø8

Ø10

Ø12,5
P.1 | Free-cutting steels, general construction steels ≤ 600 N/mm²

80

0,016 0,05 0,08 0,1 0,1 0,125 0,16 0,2 0,2
P.2 | General construction steels, steel castings ≤ 850 N/mm² 70 0,014 0,04 0,063 0,08 0,08 0,1 0,125 0,16 0,16
P.3 | Tool steels low alloyed ≤ 1100 N/mm² 80 0,014 0,04 0,063 0,08 0,08 0,1 0,125 0,16 0,16
P.4 | Heat treatable steels ≤ 900 N/mm² 60 0,014 0,04 0,063 0,08 0,08 0,1 0,125 0,16 0,16
P.5 | Tool steels high alloyed ≤ 1100 N/mm² 60 0,014 0,04 0,063 0,08 0,08 0,1 0,125 0,16 0,16
P.6 | Tool and treated steels > 1100 N/mm² 50 0,012 0,032 0,05 0,063 0,063 0,08 0,1 0,125 0,125
M.1 | Corrosion- and acid-proof steels ≤ 750 N/mm² 25 0,008 0,025 0,04 0,05 0,05 0,063 0,08 0,1 0,1
M.2 | Corrosion- and acid-proof steels 750 - 850 N/mm² 25 0,008 0,025 0,04 0,05 0,05 0,063 0,08 0,1 0,1
M.3 | Corrosion- and acid-proof steels > 850 N/mm² 15 0,006 0,02 0,032 0,04 0,04 0,05 0,063 0,08 0,08
K.1 | Cast iron ≤ 820 N/mm² (≤ 240 HB) 90 0,014 0,04 0,063 0,08 0,08 0,1 0,125 0,16 0,16
K.2 |Cast iron ≤ 820 N/mm² (> 240 HB) 80 0,014 0,04 0,063 0,08 0,08 0,1 0,125 0,16 0,16
N.1 | Aluminium, Aluminium cast alloys Si ≤ 400 N/mm² 200 0,02 0,08 0,125 0,16 0,16 0,2 0,25 0,315 0,315
N.2 | Aluminium cast alloys Si ≤ 600 N/mm2 200 0,02 0,08 0,125 0,16 0,16 0,2 0,25 0,315 0,315
N.3 | Aluminium cast alloys Si (Si ≤ 12%) ≤ 600 N/mm² 120 0,018 0,063 0,1 0,125 0,125 0,16 0,2 0,25 0,25
N.4 | Cooper-zinc alloys, cooper-tin alloys ≤ 850 N/mm² 80 0,016 0,05 0,08 0,1 0,1 0,125 0,16 0,2 0,2
N.5 | Plastics ≤ 300 N/mm² 50 0,014 0,04 0,063 0,08 0,08 0,1 0,125 0,16 0,16
S.1 | Chrome-nickel alloys ≤ 1500 N/mm² 15 0,008 0,025 0,04 0,05 0,05 0,063 0,08 0,1 0,1
S.2 | Titanium, Titanium alloys ≤ 1250 N/mm² 15 0,006 0,02 0,032 0,04 0,04 0,05 0,063 0,08 0,08
H.1 | Hardened materials ≤ 1920 N/mm² 20 0,008 0,025 0,04 0,05 0,05 0,063 0,08 0,1 0,1

Calculations of cutting conditions

Product attributes

Type N

Type N

more +
Universal usage. Suitable for materials up to strength 900 MPa.
Drilling depth 5xD

Drilling depth 5xD

Oil coolant.

Oil coolant.

Point angle 118°

Point angle 118°

Right helix

Right helix

Solid carbide

Solid carbide

more +
Carbide materials are characterised by high compressive strength, high hardness and therefore high wear resistance, but also limited flexural strength and toughness.