Frézy pro drážky per (drážkovací frézy) krátké, třízubé, nesouměrné, 30°, typ N, ploška weldon
Popis produktu
Frézy pro drážky per (drážkovací frézy) krátké, 3 zuby, nesouměrné, typ N, ploška weldon, vyrobené z rychlořezné oceli HSS Co8, dle normy DIN 327K, vhodné na drážkování, pro obrábění ocelí, nerezových ocelí, litiny, titanu a slitin titanu.
|
D
e 8 |
d
h 6 | l1 | l2 | Z | Kód zboží | Cena/ks | Skladem | Počet ks | |
|---|---|---|---|---|---|---|---|---|---|
| 2 | 6 | 48 | 4 | 3 | 230418.020 | 260,- Kč 221,- Kč | Ano |
|
|
| 2,8 | 6 | 49 | 5 | 3 | 230418.028 | 297,- Kč 252,- Kč | Ano |
|
|
| 3 | 6 | 49 | 5 | 3 | 230418.030 | 236,- Kč 201,- Kč | Ano |
|
|
| 3,5 | 6 | 50 | 6 | 3 | 230418.035 | 265,- Kč 225,- Kč | Ano |
|
|
| 3,8 | 6 | 51 | 7 | 3 | 230418.038 | 297,- Kč 252,- Kč | Ano |
|
|
| 4 | 6 | 51 | 7 | 3 | 230418.040 | 236,- Kč 201,- Kč | Ano |
|
|
| 4,5 | 6 | 51 | 7 | 3 | 230418.045 | 276,- Kč 235,- Kč | Ano |
|
|
| 4,8 | 6 | 52 | 8 | 3 | 230418.048 | 311,- Kč 264,- Kč | Ano |
|
|
| 5 | 6 | 52 | 8 | 3 | 230418.050 | 244,- Kč 207,- Kč | Ano |
|
|
| 5,5 | 6 | 52 | 8 | 3 | 230418.055 | 265,- Kč 225,- Kč | Ano |
|
|
| 5,75 | 6 | 52 | 8 | 3 | 230418.0575 | 302,- Kč 257,- Kč | Ano |
|
|
| 6 | 6 | 52 | 8 | 3 | 230418.060 | 243,- Kč 207,- Kč | Ano |
|
|
| 6,5 | 10 | 60 | 10 | 3 | 230418.065 | 337,- Kč 286,- Kč | Ano |
|
|
| 7 | 10 | 60 | 10 | 3 | 230418.070 | 315,- Kč 268,- Kč | Ano |
|
|
| 7,5 | 10 | 60 | 10 | 3 | 230418.075 | 351,- Kč 298,- Kč | Ano |
|
|
| 7,75 | 10 | 61 | 11 | 3 | 230418.0775 | 405,- Kč 344,- Kč | Ano |
|
|
| 8 | 10 | 61 | 11 | 3 | 230418.080 | 303,- Kč 258,- Kč | Ano |
|
|
| 9 | 10 | 91 | 11 | 3 | 230418.090 | 386,- Kč 328,- Kč | Ano |
|
|
| 9,5 | 10 | 61 | 11 | 3 | 230418.095 | 424,- Kč 360,- Kč | Ano |
|
|
| 9,7 | 10 | 63 | 13 | 3 | 230418.097 | 442,- Kč 376,- Kč | Ano |
|
|
| 10 | 10 | 63 | 13 | 3 | 230418.100 | 354,- Kč 301,- Kč | Ano |
|
|
| 11 | 12 | 70 | 13 | 3 | 230418.110 | 423,- Kč 360,- Kč | Ne |
|
|
| 12 | 12 | 73 | 16 | 3 | 230418.120 | 413,- Kč 351,- Kč | Ne |
|
|
| 13 | 12 | 73 | 16 | 3 | 230418.130 | 541,- Kč 460,- Kč | Ano |
|
|
| 14 | 12 | 73 | 16 | 3 | 230418.140 | 509,- Kč 433,- Kč | Ano |
|
|
| 15 | 12 | 73 | 16 | 3 | 230418.150 | 653,- Kč 555,- Kč | Ano |
|
|
| 16 | 16 | 79 | 19 | 3 | 230418.160 | 600,- Kč 510,- Kč | Ano |
|
|
| 18 | 16 | 79 | 19 | 3 | 230418.180 | 727,- Kč 618,- Kč | Ano |
|
|
| 19,7 | 20 | 88 | 22 | 3 | 230418.197 | 1 295,- Kč 1 101,- Kč | Ano |
|
|
| 20 | 20 | 88 | 22 | 3 | 230418.200 | 925,- Kč 786,- Kč | Ano |
|
|
| 22 | 20 | 88 | 22 | 3 | 230418.220 | 1 415,- Kč 1 203,- Kč | Ne |
|
|
| 25 | 25 | 102 | 26 | 3 | 230418.250 | 1 839,- Kč 1 563,- Kč | Ano |
|
|
| 28 | 25 | 102 | 26 | 3 | 230418.280 | 2 087,- Kč 1 774,- Kč | Ano |
|
|
| 30 | 25 | 102 | 26 | 3 | 230418.300 | 2 598,- Kč 2 208,- Kč | Ano |
|
|
| 32 | 32 | 112 | 32 | 3 | 230418.320 | 3 406,- Kč 2 895,- Kč | Ano |
|
Řezné podmínky
Materiál |
Pevnost |
Ap |
Ae |
Vc |
fz(mm/z) Ø 3 |
Ø 6 |
Ø 8 |
Ø 10 |
Ø 12 |
Ø 16 |
Ø 18 |
Ø 20 |
Ø 25 |
Ø 32 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| P.1 | Automatové a konstrukční oceli | ≤ 600 N/mm² | 0,5xD | 1xD | 45 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| P.2 | Konstrukční a lité oceli | ≤ 850 N/mm² | 0,5xD | 1xD | 39 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| P.3 | Nástrojové oceli nízkolegované | ≤ 1100 N/mm² | 0,5xD | 1xD | 24 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| P.4 | Zušlechtěné oceli | ≤ 900 N/mm² | 0,5xD | 1xD | 30 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| M.2 | Nerezové oceli | 750 - 850 N/mm² | 0,5xD | 1xD | 15 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| K.1 | Litina (≤ 240 HB) | ≤ 820 N/mm² | 0,5xD | 1xD | 35 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| K.2 | Litina (> 240 HB) | > 800 N/mm² | 0,5xD | 1xD | 25 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| N.2 | Slitiny Al-Si (Si ≤ 12%) | ≤ 600 N/mm² | 0,5xD | 1xD | 160-300 | 0.0117 | 0.0286 | 0.0377 | 0.0468 | 0.0572 | 0.0754 | 0.0845 | 0.0949 | 0.1183 | 0.1508 |
| N.4 | Měď, slitiny mědi, mosaz, bronz | ≤ 800 N/mm² | 0,5xD | 1xD | 80-120 | 0.009 | 0.022 | 0.029 | 0.036 | 0.044 | 0.058 | 0.065 | 0.073 | 0.091 | 0.116 |
| S.2 | Titan a slitiny titanu | ≤ 1250 N/mm² | 0,5xD | 1xD | 12 | 0.0063 | 0.0154 | 0.0203 | 0.0252 | 0.0308 | 0.0406 | 0.0455 | 0.0511 | 0.0637 | 0.0812 |
Vlastnosti produktu
Válcová stopka s ploškou (Weldon) dle DIN 1835 B.
Úhel šroubovice = 30°, úhel čela = 12°.
Vysoce výkonná ocel s dobrou houževnatostí a výbornou teplotní odolností. Vhodná především pro frézování vysoce pevných materiálů, austenitických ocelí, ocelí pro tváření za tepla atd.
Univerzální použití. Vhodné pro materiály do pevnosti 900 Mpa.
